Dreambox FAQ,dreambox help

Main

Home
My Profile
Weblog Archives
Friends

Categories


Links

dreambox Satellite Receiver
dreambox 500c
dreambox 500s
Openbox
openbox 800
dreambox 600 pvr
dreambox 7020
dreambox 500c

Dreambox 7020 Si,DM 7020 satellite receiver

The DreamBox 7020-Si DM 7020 has an updated tuner producing amazing pictures! The DM7020 is the highest end, complete FTA receiver on the market.
This is truly the future of satellite viewing. The DM7020-S is a digital satellite receiver with full Ethernet communication capabilities.
Power PC driven with Linux operating system for endless possibilities.

This Dreambox 7020 Si digital satellite receiver with full Ethernet communication capabilities.
Power PC driven with Linux operating system for endless possibilities, 250 MHz PowerPC Processor(350 Mips).

Linux open source (most parts under the terms of GPL)
Integrated Compact Flash Interface Slot
1 x DVB Common-Interface Slot
2 x Smartcard-Reader
MPEG2 Hardware decoding (fully DVB compliant)
Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
Big-size LC-Display
USB Port
10/100 MBit compatible Ethernet Interface
Modem
12V switch cinch
V.24/RS232 Interface
Common NIM DVB-S
32 MByte Flash
Channel-change time < 1 second
96 MByte RAM
Unlimited channel lists for TV/Radio
Integrated IDE UDMA66 Interface
Supports directly bouquet-lists
Support for internal HDD in any capacity
Full automatic service scan
Supports EPG (electronic program guide)'
Supports multiple LNB-Switching control (supports DiSEqC)
RF modulator
S/PDIF Interface for digital bit stream out (AC-3)
Supports own videotext
Audio/Video cinch out
Fully adaptable OSD in many languages and skin-support
2 x Scart-interfaces
MINI-DIN connector for extern IR (send)
DreamBox DM7020Si Parts
DBS-Tuner:
Frequency Range 950 . 2150 MHz
Signal Level - 65 dBm . - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 &mp; MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard>

TV-Scart:
Output: FBAS,RGB,S-Video over OSD selectable

VCR-Scart:
FBAS

Mini DIN:
I2C for stearing of external devices
IR funktion

Ethernet:
10/100 MBit compatible interface
Function Update of Firmware, Connect to PC

USB:
USB 1.2 connector

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Pins:

5V
SDA (I2C-Kanal 2)
SCL
3,3V
GND
IR-Output
GND
LNB power and polarisation :
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode

UDMA66 IDE Interface:
Intern for connect HDD
Compact Flash - Reader

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Physical specification:
Ambient Temperature +15?¥î..+35?¥à
Humidity < 80%
Size (W x D x H): 374 mm x 230 mm x 75 mm
Weight: 1,8 kg  without HDD

Power consumption:
< 20W (in operation, horizontal polarization / 400mA LNB current)
< 11W (in operation, without LNB)
< 4W (Deep-Standby-Mode)

Input voltage:
230V / 50 Hz alternating acurrent +/- 15%


Posted: 12:22 PM, 3/31/2008
Link

Dreambox 500c brush machine installation of a new method of IMG

Dreambox 500c brush machine installation of a new method of IMG

Through FTP upload to Dreambox image will be the / tmp directory, rename it for root.cramfs (DCC itself with the function), then into Dreambox the setup menu, select Software Update, the re-elect manual update. Attention, the expansion setup in a Factory reset once, or else the system will be retained IMG many refuse a document.

Posted: 12:21 PM, 3/31/2008
Link

DM500S listen to the radio network approach

Dreambox 500S listen to the radio network approach


1, according to the blue button remote access to Blue Panel
2, election additional settings
3, re-elect Dreamnetcast
4, which are connected to the shoutcast list xml
1) Dreamnetcast XML
2) shoutcast XML TOP (TOP40)
3) shoutcast XML GENRELIST
Select an entry.
5, for example, we have entered shoutcast XML GENRELIST
In this there will be a lot of the list, which is the classification of various types of music
6, for example, we have chosen to Chinese
7, inside another classification, we will choose one.
8, as http://207.44.192.115:8010 when there is the appearance of choice.
9, a look at the next Status Show "broadcast", we can have an opportunity to appreciate.
10, you can own the radio added Changyi Dreambox 500S

Posted: 12:19 PM, 3/31/2008
Link

Dreambox 500s,DM 500s satellite receiver

The Dreambox DM 500-Si is the first Linux based DVB Receiver. This receiver runs on open-source software developed by hundreds of developers around the world. This is the ultimate machine. It has many differnet skins that can be applied to make the user experience completely customizable. If you're looking for a VERY powerful Dreambox DM 500-Si, and something to have fun on, this is Dreambox DM 500-Si for you.

This unit has a great EPG and supports Personal Video Recording. You can attach this unit to your Windows based network at home and record your favourite tv programs right onto your hard drive.

DreamBox DM 500-Si :
The DM500Si is the smallest Linux satellite TV receiver, with 1 x Smartcard-Reader.

250 MHz IBM PowerPC Processor (350 Mips)
2 LED status
Linux Operating System
Full automatic service scan
Supports directly bouquet-lists (indirect unlimited)
Supports multiple LNB-Switching control (supports DiSEqC)
1 x Smartcard-Reader
Unlimited channel lists for TV/Radio
SPDI/F nterface for digital bit stream out (AC-3 / DTS)
MPEG2 Hardware decoding
Channel-change time < 1 second
Fully adaptable OSD in many languages (skin-support)
100Mbit full duplex Ethernet Interface
Supports EPG (electronic program guide)
1 x Scart-interfaces (fully controlled by software)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:
Frequency Range 950 .. 2150 MHz
Signal Level - 65 dBm .. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming

LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming


Power consumption:
< 10W / 12V

Input voltage:
DC12V,alternating acurrent +/- 15%

 

Extern power supply:
Input:
110-240V AC / 50-60Hz / 0,6A
Output:
12V = / 1A

Others:
Ambient Temperature +15°C...+35°C
Humidity < 80%




   The DreamBox 500s product has been tested for over 12 months by hundreds of users and turned out the most reliable product among the solutions of a kind. Our DreamBox 500s is a new highly stable and reliable hardware product, based on a new thoroughly tested hardware platform which has proved to be extremely safe and efficient even after months of heavy tests under extreme loads.

Posted: 12:19 PM, 3/31/2008
Link

Dreambox 500s fans

Calmly If there are now TV circle can be fever, futzing with things, there are at least two major themes of great significance: First, high-definition digital satellite television, satellite television is another shared, the former due to the source and receiver satellite programs cost the restrictions, it was not possible large area popular in a short time, and then blossom everywhere satellite television sharing, as long as the Internet exists, as long as it can receive satellite TV, it will have to survive the market. And in this area, now is the most fiery playing dreambox 500s of the figures. In fact dreambox 500s  long time ago, because of the high prices, few people are built and only a handful of enthusiasts as the hands of the plaything. , - C Digital TV with cable, and - T terrestrial digital TV is dedicated machine. dreambox 500s  in hardware can be considered DM7000S simplified version, after the panel reduced the number of input-output interface, the CI module removed part of the front panel display, an external power supply, eliminating the machines hard disk interface All this makes dreambox 500s  the much smaller, but functionally it is also no ambiguity, operating more humane, more powerful. dreambox 500s  digital machine is very compact size, appearance size of only 195 mm ¡Á 130 mm ¡Á 40 mm, if you said this figure is not so sensitive, perhaps will be able to illustrate the problem. Four of the most common figures stacked together, the more easily seen: the bottom is the one we are familiar with the route Section 410, it is the X910 machines above (Section 410 of the flights operated exactly the same interface fact is the 430's traverse, 788 X machines combination of the shell), which is the most common 788 X machines shell, then the above mean that we will be introduced by the DM500S, of course, the smallest, which is the top that Taiwan HE-986 micro-digital receiver has. From another perspective, the response to the size of this machine, DM-500S than half of flights to Section 410 of the small, and Kinpo HE-986 even smaller. This compact volume, why functional so strong, many TV buffs by the recovery rods, and now become the most popular machines? We might as well look at the website of the lawsuit, given this machine: the machine using 250 MHz IBN PowerPC processor (350 Mips), the Linux operating system, with a reader, MPEG2 hardware decompression, DVB-S, V. 24 / RS232 interface, 100 Mbit two-way Ethernet interface and two LED instructions, an infinite number of TV / radio channel list, channel conversion time of less than one second, fully-automated service scanning, EPG (EPG), support DisEqc, multi-language menu, digital bitstream output SPDI / F interface (AC-3/DTS), a subject to the control software interpolation Scart output district. There are some other technical indicators here is not an exhaustive list, all digital satellite receiver now due conventional function of the machines are in place, but is also of conventional machines do not have the power of a word, dreambox 500s  built-in Linux computer operating system is a computer with a satellite receiver machine, DM500 and 1020 PC Card almost, but functional and powerful than the 1020 cards a lot. 1020 cards are soft unpacked, and the machine is hard decompression, support multi-multi-server systems to share, do not change system, and do not need CV12, all software installed. The system can be shared with Seca, Viaccess, Irdeto, Viasat - NDS, Conax, Nagra1, Nagra2 etc., while supporting a variety of encryption systems Genuine card authorization. The card can be inserted ordinary decryption can also network with CV12 the same through sharing software declassified. Support for multi-satellite receiver, of course, picture quality than 430 such machines good. Other features also, through the network can be connected to a computer booking video. Not only can be connected to TV watching, and through computer network lines in the same frequency LAN players. Open operating system, powerful, fun high, more suitable for TV, computer amphibious fans futzing. Along with the development of various types of plug-in succession, the machine can achieve more practical function. We turn first to understand what this dream box hardware facilities it.
2006-11-19 18:3255585
In fact, said to really thank the domestic OEM manufacturers, makes this a few thousand dollars worth of machinery, ordinary people can take to the 200 USD price, the ordinary TV fans will also have an opportunity to view the crew style, although now domestic copied version of this aircraft manufacturers as many as a dozen homes, but still the same basic appearance, mostly imitation of the original product appearance and the other is the larger machine, the receiver will soon be in power, but the appearance of rare. As manufacturers, there are now prices continued a downward trend, of course, will be increasingly difficult to guarantee quality,this was first copy version, which also mention what is authentic products, but one thing is certain , which is the first domestic version dreambox 500s the copy quality product is the best, I was fortunate enough to get the machine because it is. dreambox 500s the overpack is very delicate, very small, except inside a mainframe and the remote control, while the rest of the annex is an external switching power supply and a thick layer of the specification. Mainframe appearance, we have said earlier, dreambox 500s size is very small, very exquisite workmanship appearance, except for the plastic front panel material, while the rest are forming stamping the plate frames, on the hands of a certain weight, but relative to their size, unit is not more than 0.6 kg. The overall appearance of a silver-gray, and the front panel is white and silver gray-and streamlined design, coordination and natural looks, it seems far-reaching significance is so unpredictable and ever, because it is very similar to a logo. On the left is the dreambox multimedia LOGO, the following is the specific type logo, the right is a decryption card slots. Right panels relative brevity, only a standby button, the small window there are two LED indicators, namely green power a less remote control instructions, the standby light is red, so concise. DM500S the panel after the same simple: IF into a two-port, but with other machines is the difference between these two LNB interface of the two, is from the back to the board is to highlight the fact, it was said that according to this point , can be judged machines using the PHILIPS (Philips) LNB, the first such high-frequency models is the most used SU1278/LH2 the LNB if it is exported directly ALPS (Alps) Electrical Manufacturing Co., Ltd. of Chinese companies LNB, products mostly models BSBE1 - 702A of LNB, I only have this one,no record this According to the authenticity, but the use of this machine is really the integration of Philips tuner. In a group of the above AV output port is a RS232 serial port, mainly for the software upgrade. different audio and video signal is displayed! The right turn is in digital audio output fiber, 12 V DC power outlets and network line jack. The silvery white with the remote control and host of very good, high sensitivity, feel comfortable. Key design very much in line with people in the use of habit, the program will be used, the volume on the median, and is most likely to touch on the thumb, giving great convenience to users, the remote control work is not bad, I had to admire the domestic imitation capacity. The allocation of power for the switching power supply can be 100 ~ 240 V under normal work, work is quite good, and adopted the CE, such as UL certification, quality is assured, although the nominal power of the small 10 W, 12V/1A Electricity has been enough, but for insurance purposes, for 12 V/2A power can provide more abundant energy, greater use of the stability of the unit. This machine attached a thick manuals of the 32 open, and is also unique in the country, there are very detailed instructions. In the back of the machine, there are a white label, there are four elements: 1, machine name; 2, barcode; 3, machines only S / N of 4, machine card, the only MAC. We have to look at the barcode and S / N, and the MAC, S / N of the box with the overpack bags, and power counterparts, because each machine is different, or to use computers to see DM500S MAC card, whether displayed on the computer with a few stickers and other positions are 1 point 1, these points is to determine whether or not you buy the machine is a machine complete package approach. The DM500 used mechanism steel to the electromagnetic shielding of good, and the external switching power supply using DC power supply, the use of the flexibility has been greatly strengthened, and further reduction of electromagnetic interference is conducive to the improvement of picture quality and increase , of course, for the long-term and stable work machines also play a role. It is precisely because of the external power supply and the reduction of hardware, makes the machine to further reduce the size,open as the whole machine is within a block circuit boards, and even at the card also done directly in the motherboard, Pai line through the link with the outside world only two, one is the front panel, another is behind the escalation of serial board, in fact these two places are no specific circuits, which are external mouth, such as the front panel that is a power LED and two standby button, the remote control receiver first few connections, we can see that the integration of this machine are very high, in order to allow you to see more clearly, we will remove the two lines inserted row, and front panel after panel and the baffle removed, we can see the full picture of the entire circuit boards, circuit boards and on the reverse side there are no other devices, circuit board positive structured, the management function block boundary clear. To tie in with the dreambox 500s machine tests, giving them a better view of this machine face and internal structure, I have digital cameras for the fifth time upgrades, the purchase of a 10 million pixel CCD digital camera, will be the most minor details to show you. Motherboard most striking of largest IC PowerPC, which is the soul of the machine. This IC features, the PowerPC is Performance Opimization With Enhanced RISC Performance Computiong acronym, International Business Machines Corp. IBN devoted to the dedicated digital TV decoder chips, chip tagging Digital SetTop Box Intergrated Controller, Italy for the management of digital set-top boxes dedicated chips. In the most chips can be seen beneath the specific models of the chip; IBM39 STB02500 PBA 05CA. IBM STB02500 single decoder chip is a PowerPC 405 processor. The PowerPC 405 is a high-performance, low-power CPU, the power consumption of less than 1 W, embedded a MPEG2 decompression chips, work speeds up to 252 MHz, the core is a 32-bit RISC CPU, the computation speed of 350 MIPS. These messages can be machine software from internal information displayed. It is said that there are two versions of this chip, or two Korea and Taiwan origin, the machine is the TA / WAN manufactured. Such a high frequency decoder chips for digital satellite receiver rare, the use of BGA Packaging computer chips for digital machine also rarely see, and we see is the SC2005 series chip, with performance the main chip so superior, of course, the quality of this machine are guaranteed. Motherboard another course, is a body of the tuner, we have said before,
2006-11-19 18:3255585
The machine used in high-frequency PHILIPS first, model is SU1278/LH2, this brand in the digital machine is relatively rare, integrated tuner quality of the merits, the decision to the overall quality and performance, because it is digital the first portal receiver, the actual use of that deserves to be PHILIPS brand, performance is very stable, relatively low threshold, the only shortcomings of the heat slightly larger, perhaps with their smaller size of the chassis, cooling Performance is obviously smaller than the chassis, everything that is both an advantage there must be a disadvantage. The plane's two motherboard memory is used Hyundai brand, which is playing computer is not strange friends, and in fact it on the computer memory of the same, including a 16 M x 16 SDRAM, another film 8 M ¡Á 16 SDRAM, a 16 M for the system, another film 8 M for decoding. Memory chips Read a small IC, Model SP3243EEA is that the United States Sipex Corporation RS-232 dedicated interface circuit. Above the main PowerPC chip IC also one we have not said that this is the machine FLASH chip, 8 MB of flash memory, model is TE28F6 40, is based on Intel's products. This machine the left is the IC card interface chip, model is AX88796L is Taiwan ASIX Company introduced NE2000 compatible with Fast Ethernet controller, its internal integration have 10/100 Mb / s adaptive physical level transceiver , and 8 K x 16 SRAM. Note that in this chip and¿¨×ùbetween, there are three micro-LED patch, D5, D6 and D7, which is not peacetime luminous, and only line will be inserted into the network interface card in the machine, which the D6 and D7 will be normal given green light, and this shows that the Internet is connected to normal, if the LAN installed correctly inside the aircraft, the plane that is as a computer terminal access network, then D5 will be flashes that even within the network and transceiver, communications normal. The motherboard also has an LED light the patch, which is in the integration of Philips tuner on the left side, labeling for the D72, this LED is luminous in peacetime, and search in the normal reception when luminescence, Internet and luminous intensity of the light is less than specific purposes is not yet clear, and the signal may be related to the instructions now in further observation, perhaps at the end of this paper will answer. Worth mentioning is that the audio part of this machine, this machine's audio D / A converter is used WOLFSON brand WM8761GED, this chip is 14 pin SOIC package, the power supply voltage of 2.7 to 5.5 V, power of 66 mW dissipation. Wolfson (Wolfson) is headquartered in the United Kingdom. Edinburgh, online and digital signal processing technology developed rapidly, the results can be applied to different audio products, such as PC, PDA, CD, DVD, Digital Set-top-boxes, digital television, MP3 machine, professional audio equipment, known as audio decoding experts, and their branches worldwide. WM8761 is a high-quality 24 - bit/192 kHz Stereo DAC, - 100dB SNR ( 'A'weighted @ 48 kHz), - 90dB THD, DAC Sampling Fr equency: 8 kHz - 192 kHz, we can see that technology is a very good indicator, we had a motorized audio digital machine parts used PCM1716E, only 24 - bit/96 kHz it, we can see that the machine's audio, it was an indicator, of course, the machine's audio, it was an indicator, of course, the fiber of this machine more audio output provided the original code output, if an external decoder can enjoy the Natural sound digital audio broadcast or the. This machine used DC 12 V power supply, as the number of machines required multiple voltage, obviously there must be corresponding DC-DC boost or buck circuit. This machine power is partly based on Linear Technology, Inc. Model for the LT1940EFE buck switching regulators, the chip has a wide input voltage range, dual-channel, single-chip 1.4 A, 1.1 MHz switching frequency, level after using the multi-level inductance filtering, effectively reduces the power supply ripple and ensure the stability of the overall electricity supply. Finally we will look at the motherboard of the various output, input jack, from left to right are: IF IF input and output, AV output port, the EU inserted a variety of signal output, optical digital audio output, 12 V DC input (in the negative is), net line input socket. Above us briefly taste of what the hardware facilities of the machine, we can see that this machine volume is small, but the basic hardware configuration is a powerful, in fact dreambox 500s is the Linux operating system containing a computer, as powerful, open style system variety of plug-in and annex makes aircraft playability greatly enhanced, as many of the burned mates want to futzing with a machine, but there is one thing that we must pay attention to, that is if we want to play well this machine, must possess the necessary computer knowledge and operation skills, and can tie in with the use in the computer, otherwise it might give you the feeling seems to be a common than the figures for ease of use. Well, I should like first of the machine operation to have an initial menu awareness accept a satellite on the first Look at the program. The first AV output of the machine and television set AV input connector, and despite the interpolation of a European signal output, but there are television sets in the country imported European interpolation is minimal, and now a TV are any there AV input. Then external 12 V power supply is connected with the correct outdoor antenna with the crew after the LNB IN connection (preferably has outdoor antenna at a certain satellites, presumably to buy DM500S friends not only have to possess a satellite receiver antenna it), the open receiver power, it is the screen and writes a boot to ensure that you have never seen, red, yellow, white and blue colored with a coordinated, and the machine at the time of purchase, dealers have their brush - the Chinese version (now already purchased the Chinese version is, of course, also an English menu operation optional), if your machine is more than the English language version, you can also brush into Chinese version, the specific methods we have described in detail behind. What we are seeing now is the final boot screen, the screen actually appeared twice, "did not find the service provider" hints that did not receive the signal. Because of this machine with Linux operating system, as compared with ordinary digital machine started some time longer, about 10 seconds to enter to receive images, and other machinery This is a great distinction. According to the menu on the remote control button, the machine has the main menu,ÓÖûseen ways bar, with icons above, the language used to illustrate below, and it includes eight items: TV mode, broadcasting model, the paper model, VCRs, timing, setup, information, shutdown, the default mode is television. About direction keys can be used to cycle switch, we first entered the paragraph (6) page - set up by OK button to confirm set up after entering the main menu, the menu now is we have compared the entry of a habit, then selected system setup, move on to the next layer of sub-menu. In the Setup menu system, we carried out the first major time setup and OSD settings and language set up. In time the Setup menu includes two, and immediately set the time zone correction in the time zone settings course, we have to choose GMT +8 Beijing, Chongqing, a Hong Kong; time correction menu is actually re-set the time machine This is mainly behind the timing for video services. OSD language in the project, only two options, Chinese and English, of course, to choose Chinese, and if the other versions, the language may be a lot of options, but also has a very small image of the national flag logo. In OSD settings, there are a number of functions is also very practical: The first is the transparency of regulation menu, the default is opaque can, of course, according to their own preferences, and regulating different transparency, but also on the menu to adjust brightness and contrast , can see distinct differences between it. Forget all the items adjusted, should be carried out "Save" and preserve There are two ways, one is moved to preserve cursor buttons will be on OK confirmed that another directly from the green on the remote control button, directly preservation and after withdrawal from the interface, using the remote control of the four multi-function keys, you can quickly complete a number of operations in different menu color keys have different functions, even if not under the menu, the color keys also have meaning Shortcut keys. This menu can also be used for other operations, such as changes in the menu structure of the arrangement, change the menu appearance (skin), and adjustments to the teletext center position, which we in the future will be mentioned in the letter. The next phase will introduce the multi-satellite receiver for the establishment, as well as their own names to order Chinese program, the machine multiple video output settings for the interface skin after another will bring you the feeling of the new.

Posted: 12:18 PM, 3/31/2008
Link

DreamUP brush dreambox DM500 software tutorial

DreamUP brush dreambox DM500 software tutorial

1, download DreamUP Brush software, which is dreambox 500c  machine use.
2, connecting good brush 410 series of the 9-pin COM mouth cross-line (2,3 crossover, double-headed mother mouth lines), a Next computer COM1 mouth, a link dreambox 500c machine.
3, opened DreamUP Brush software and removed the use of the network connection check, and click on Connect (connecting), and then stuck dreambox 500c machine power, you can see the process of connecting. Careful not to open dreambox 500c power, not brush machine.


Posted: 12:17 PM, 3/31/2008
Link

DM500S on this easy-to-use dual-head vibration C

dreambox 500s on this easy-to-use dual-head vibration C

Not long ago. Home increased by a TV. Living room. With the original May 06 to buy a small version of machines. See 134 122138 KU 115.5 125 Oh now and the quality of it Meifabi. Bedroom. Use the big board machines. read 134 122 76.5 138KU and C 146115.5. window dressing room below. love with my Nokia 9500. read 105.5 115.5 125. at the same time watching Star 6 B. trouble in the past. use my collection of long-PBI2100 double the C wave vibration HF head. set to 5150 5750 11700. should be no issues now. It is, however, only the level of signal. no vertical signal. set to 5150 5150 11700 signal level only. set to only 5750 5750 11300 vertical signal, but in my free-PBI1000S the use of normal. Later, under the guidance of a few friends. K. increase satellites plus 22 is the port unchanged. or not. upset for a few days. end without result. now consider it a fever machine design problems. or set up their own incorrect. huh. see my Nokia 9500. reminded of the way. try Modified symbol rate. Originally, I used the Nokia 9500 multi-satellite receiver. is 22 K in the use of the circumstances. Modified downlink frequency solution the. experiment is now a perfect solution. town setting 5150 5750 11700 circumstances. level signal normal. vertical signals in the downlink frequency minus 600. be for example: Beijing Satellite TV, then it was 3951 with a simple 3951-600 = 3351 bar. friends. see several in the group of friends. dreambox 500s use with the double-C did not receive the results of vibration. hastened to try it. love machine is not our problem. huh. settings or our reasons.


Posted: 12:16 PM, 3/31/2008
Link

DM500 how to configure the default boot broadcast channels

dreambox 500c  how to configure the default boot broadcast channels
Use the remote control to your favorite channel, dreambox 500cand then by remote control of power switches, etc. from the menu, select "restart" button, the next time you re-entered the power of dreambox 500c, is that your final choice of the channel

Posted: 12:15 PM, 3/31/2008
Link

How to use Dreambox

How to use Dreambox

1 Introduction:

For many years, I have been using satellite antenna to receive television. I just started receiving the D2MAC format of analog TV. Now after a few years, satellite television is already something of the past, digital broadcast DVB-S format gradually rise. The first generation of satellite receivers (set-top boxes, AKA demod) to be a satellite television channel vendors renting. They only equipped with some humble components, channel switching slow, OSD shabby for a nuisance, not output digital audio, the recipient of low sensitivity, MPEG2 decoder poor results, and even firmware or locking,dreambox 500c ?only by the suppliers As their feelings for you to upgrade. The market was also a small number of low-cost digital receiver there, but the supply them with satellite television provided by the special services (such as Electronic Program Guide AKA EPG, Pay Per View AKA PPV ° etc.) is not fully compatible.

The second generation of satellite receivers to Xsat 310/410 and Aston Xena series as representatives of their set-top boxes is a pioneer bookshelf, and separated from the service providers, and the official decryption card compatible. Through pc, you can set each of them to re-channel position, the management of your favorite channels, and even can use the Serial Line firmware upgrade.

Now, the third generation of set-top boxes already listed. Dreambox users is a highly recommended by the third generation of machines. The IBM PowerPC and MPEG1 / 2 hardware decoding the support of the open-source Linux system with new set-top box is completely open. Dreambox not only provided quality images and sounds, there are many other connected interface with the outside world: Ethernet, USB, PS2, Compact Flash and two Smartcard reader. Dreambox performance excellence: the ability to set up various satellite antenna, satellite channels and no quantity restrictions, fast channel scanning speed, allowing direct digital recording, and so on. If would like to receive encrypted channels, you only need a legitimate company received from the corresponding decryption support for the card and a PCMCIA card CAM. Or you can load the built-in smartcard reader can use the decryption card firmware. As dreambox 500c more like a computer instead of ordinary consumer electronics equipment, need more time to familiar with it, make the best use of it.


1.1 guide for readers

These guidelines are designed to guide you how to make your dreambox 500c in the image of fully operational, and set up multiple start, so that you can try out different software combinations. These include the establishment of a network and channels available (for free and encrypted channels are free).

1 Introduction:
1.1 for readers
1.2 required equipment

2: Installation
2.1 positioning satellite antenna
2.2 satellite channels set up and
2.3 network configuration

3: basic elements of operation
3.1 basic communication
3.2 editorial channel list and collections
3.3 write image

4: HDD or USB memory stick on the multiple launch
4.1 HDD multiple launch set
4.2 USB Memory Stick set up multiple start
4.3 Management Images
5 Image examples: Installation MisterX
5.1 basis
5.2 Simulation
5.3-defined configuration

6 digital video recording and playback
6.1 in Dreambox or PC's hard disk recording
6.2 PC intervals
6.3 using DVD playback machine
6.4 Other formats
6.5 Use LAN broadcasting
6.6 in dreambox 500c play Divx and other formats

7 summary
7.1 techniques suggested that
7.2 Conclusion

 

1.2 required equipment

A dreambox 500s!

dreambox 500c the first revised version, there are some hardware problems, they V1 second amended version to solve the (apart from the question of a power limit). V2 is a change, the revised version of the V1 on the 2nd (with an increase of two power capacitors). They have adopted blue backlit LCD display.
V3 new addition of a piece of PCB, the power to amend the problem. These may also include some small changes had not been documented. Its LCD is amber, and there is a shaped like a 3 xxxxxxxx the serial number.
I personally use the Dreambox purchased in a German site (Dreambox MK4), but I can not find this version of the related documents. I guess, this is Taiwan V3 machine.

-- An integrated into Dreambox drives: dispensable. I personally do not have a hard drive. Hard drives will have more noise and consumption of electricity. You may not be installed, such as hard drives and again after the acquisition of its own. But bearing in mind not every hard drive can be installed to enter.

-- A 128-megabit USB memory stick: If you do not drive, I strongly recommend that you use it, and if you want to use this guide, the Memory Stick is essential. I use the Dane-Elec, USB2.0, no major compatibility issues. USB only pay attention to certain circumstances in default write protection is open, manufacturers must first use special software provided in Windows unlock use only.

-- An unused modem serial line is also very useful. If you let into the network failure or cessation of operation, it allows you to connect Dreambox.
This line can be purchased in stores, or you can do on its own system. Good can use the wire screen spacious, but not too long. Length should not be more than 2 m to 1 m better.

-- Equipped with the 100-M Ethernet PC card. Dreambox and PC line can be directly linked to cross-Ethernet, or through the use of common network hub / swich connections.

2: Installation

2.1 positioning satellite antenna

T Only you set up a satellite antenna No good circumstances need to do this step. This work is difficult, so please have the best experience in the installation to help you, or to pay people to install. If you think that the certainty of their own, set up methods See here. .

2.2 satellite channels set up and

Assuming you have installed and antenna can be used. The first time you start the Dreambox, you must choose language, time zone, and then the antenna is installed: Basic (single LNB / single dish), Medium (various LNB / Dishes and with DiseqC switching), or complex (a motorized unit ). Then to add at least one satellite.


Now to start in at least one satellite channel scanning. Dreambox scanning speed of the impressive, all this based on an all-band satellite contains selected XML documents. Remember the letter, some bands do not contain any digital channel normal, because in part for the channel will continue to broadcast analog signals or temporary. Now press the blue to visit a page:

Press the blue button, and then choose automatic scanning will be a window into a show progress:

2.3 network configuration


The network now has to set. Press the remote control button on the small dream, and then choose Setup - Expert Setup - Communication Setup.

I recommend the use 192.168.0.24 as Dreambox ip, as a growing number of OS image using this default value. As you set up the gateway used by the internet gateway (router or if your internet connection through the sharing of the Internet gateway is usually 192.168.0.1). The mask set to 255.255.255.0. Note that if you use the home gateway (DSL or cable routing), then your IP address will be 192.168.1. X context, the need to allocate the appropriate IP Dreambox. Masking the same, but Gateway usually be changed into a 192.168.1.1.


When connected to the Internet, the DNS with your PC's DNS unanimously.


If you are not connected to Internet, then establish a link in the Start menu, choose Run and enter command (for Windows 98) or cmd (for Windows 2000 and XP). Then type "ipconfig / all" you will be able to get a network on the relevant set list. The screenshots shown below in a two DNS position.

In addition, to ensure that your Ethernet IP address in the same subnet (192.168.0. X), such Dreambox and other computer on the network can access the Internet. This need for a hardware router (best the program is also able to provide a certain degree of protection of the network) or use Internet Connection Sharing (search Google can access this information). After the completion of the above steps, your Dreambox has been able to download updates on the Internet. To test whether normal work, you can try to ping the dreambox 500c:

If the ping 192.168.0.1 (your PC) is not normal, that is not correctly installed PC. If you use a software firewall, it closed its re-test and re-examination of network configuration. If the Dreambox open and you have the right set of circumstances has also ping illogical 192.168.1.24 (Dreambox), it is possible wiring problem.

3: basic elements of operation

3.1 basic communication

Network configuration good, telnet and ftp process was opened. Telnet is a very popular early visit to the remote computer methods. It only support command line level. We should establish Telnet connection, click on the Start menu, choose Run and enter "telnet 192.168.0.24." When asked to sell, import root, the password is Dreambox..

We should establish the dreambox 500cFTP connection, you can use your favorite FTP client or the Windows command line FTP (using the same methods and telnet, but input is "ftp 192.168.0.24" rather than "telnet 192.168.0.24." Users as with telnet and password).

3.2 editorial channel list and collections

Now we have to import before the establishment of satellite channels and the time table. DreamboxEdit is the best option. Install and run this program, click on ftp icon, enter your storage channel lists and collections. Then click Receive Files from Dreambox, waited a few seconds, you have all the channels in DreamboxEdit Lane emerged. In the right window, you can create or finishing your TV and Radio collections can also drag from the left side of the middle part of the selected items to add channels. The channel also arbitrary rank.

 

To allow dreambox 500creceiver you have done a change, click on FTP icon, then click send to Dreambox. Uploading is completed, click reload settings on Dreambox, you will be able to see what all the Dreambox change.

To enter your collection, only press on the remote control, or under the arrow, and click on the blue button, then choose navigate OK. To the User-in the choice of switching channels in the bouquet, only press left or right. The chart is a list of sample collection:

 

3.3 write image

Now turn "images". I said the image refers to a software, which includes use of television, recording, and other operating systems and applications. In its devices (such as the independent Divx players, other set-top boxes, DVD burners, etc.), we usually call it firmware. But image appears in the Dreambox, the widely-used. An image including control of the Linux operating system and hardware recording broadcast television applications.

You can download the latest dreambox 500cmanufacturer website of the official image. Writing this article, the latest version of v1.07.4. If your Dreambox version below it, you should definitely upgrade it, because multiple launch plug - 1.3 b request of not less than this version. To write image, you can use dreamUp (manufacturers) and with serial line (security but slow), LAN (not recommended) or use root.cramfs law. The last method is the method I recommend, through FTP upload to Dreambox image will be the / tmp directory, rename it for root.cramfs, Dreambox went into the setup menu, select Software Update, the re-elect manual update.

 

Please make sure that you are using the image is correct, otherwise you will become dreambox 500c may have to return to the system as to the repair of electronic garbage. If you want to remove the flash, leaving an image of all personal settings (using multiple USB commencement not to do so), in guiding logo appeared on the screen at the same time near the Dreambox, and the next button. LCD there will be a "Flash erase" information, and then Dreambox will reopen. If Dreambox crashed in the process, it can also press the restart button of the three devices, or unplug the power cord.

Now you have basically ready recorded. If you set up multiple start on the environment (allows you to switch in a number of image Lane), and watched the installation of a customized image examples interested can click on the link in the text above.

6 digital video recording and playback

6.1 in Dreambox or PC's hard disk recording

As shown in the following chart by pressing two buttons can begin recording:

 

OSD open in the circumstances, when the equipment in the recording, you can see that there is a flashing red lattice. When recording, you can use timeshift function: to stop playback press the yellow button (to record) to do popcorn (or any other matter), then press the green button to return to play. However, this function is not perfect. I found this timeshift function in Gutan fat image, there is also to be improved.

Intervals recorded stream, the file mode, the choice of paper, press the OK will be able to play.

6.2 PC intervals

Installation Elecardn decoder can put you in your favorite media player in the spectator. Ts document. Or, you can use VideoLAN. VideoLAN easy-to-use, stable and able to read TS perfect document.

6.3 using DVD playback machine

As digital TV and DVD using the same compression format, with DVD to record it can be said to be taken for granted. This process includes advertising and creative shear DVD. On this theme, Doom9 has an excellent guide article.

6.4 Other formats

Of course, you can record things turn into other formats. If you want to create a SVCD, I recommend Doom9's DVB to SVCD guide, DivX / XviD transformation, I recommend Doom9's DVB to DivX / XviD guide.

6.5 Use LAN broadcasting

DreamTV LAN can use on radio, or Wingrabber VideoLAN can also do this purpose. Guidelines in this regard will be introduced.

6.6 in Dreambox play Divx and other formats

Dreambox can not deal with hardware MPEG-2 more than the complex flow. However, the PC to complete on-the-fly DivX to MPEG-2 conversion and stream this to the Dreambox is feasible. It requires a powerful PC, but quality will decline because DivX and MPEG2 between conversion would normally lead to visible quality loss.


7 summary

7.1 techniques suggested that

At the same time press Dreambox front panel of three buttons to restart the Dreambox.

Dreambox can play MP3 and Ogg Vorbis two audio files, but also its hard drive, USB Memory Stick or CF card images slide presentation. There are many Internet plug-ins available for downloading the image can be in the directory in direct Dreambox choice. If you insert a CF card, it will be activated automatically when loaded to / hdd, so when using the exchange of documents to be careful.

Watching television, press the blue button, the use of encrypted information will be displayed, and let you choose the corresponding emu. Certain image storage for each channel selected under the emu.

If you web browser input dreambox 500c?IP address (in this case for 192.168.0.24), you can change the channel and remote access EPG.

7.2 Conclusion

Well, I spent a lot of time writing these things, and I hope you will find this guide useful and easy for you to use. I want to thank those creative Dreambox image of the authors, such as Gutan, RUdream, MisterX, SandBox, Hybrid, Hydra, NedKelly, SF team, DBF, Ahaustria, Neutrino, PeterPan, etc.. Thank you so dreambox 500c become so interesting. In addition to all EMU should also extend my thanks to the author.

At the same time, I also encourage readers to contribute to those who provide free tools for Dreambox people.

Thank Sat-Industry Forums and Dreambox Net Australia, I began to help dreambox 500c?trip friends.
Congratulations SandBox Team, they set up a French site and forums, and created a good sandbox image.
Special thanks Doom9 help amend my articles in English and French and his great reference site.


Posted: 12:09 PM, 3/31/2008
Link